Continuity Check at the Pad

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I documented the relayer circuit that DARS uses a while back. The PCB layout I created then is for ExpressPCB but recently I spent a few minutes on a new layout for a cheaper version. Not only cheaper per each but you don't have to buy a dozen at a time, just three. If anyone is interested in that I can make it available.
 
Did you just create a larger PCB with multiple copies? You can do that and just cut them apart...
 
Did you just create a larger PCB with multiple copies? You can do that and just cut them apart...

Perhaps I wasn't clear.

ExpressPCB miniboard service gets you three copies of a fixed size board and four of the relayer control boards fit on it. So the minimum order is twelve. $51 plus shipping.

At OSHPark I can get boards with solder mask and silk screen with a minimum order of three. About $12 including shipping.

So that is 12 copies for $51+ or 3 copies for $12.
 
Back
Top