MIM-104 Patriot PAC1 drawing

Does anyone have a detailed drawing of this? I am considering building a 6" one from the thin wall PML carbon fiber. Thanks.

Here's a redraw I did, based on the NARTS scale data package and other references, with some clearer dimensions than the original. I'm a drafter by trade. If you're building for sport you don't have to worry about the slight difference in diameters.

View attachment MIM-104 Patriot Missile.pdf

You probably don't want to know how the Russians got hold of this... :lol:

Thanks so much!

I ordered a Madcow Patriot yesterday. I will be using these too. Thanks, guys.

Most of the Kits have oversized Fins.
I'm going to get another Estes Patriot Kit and use these Drawings to try to make it closer to Scale.
It looks like a tiny bit of Nose Weight and a 24mm MMT will do well.
Oh, and a Tail Cone ofcourse.

TopRamen said:

Most of the Kits have oversized Fins.
I'm going to get another Estes Patriot Kit and use these Drawings to try to make it closer to Scale.
It looks like a tiny bit of Nose Weight and a 24mm MMT will do well.
Oh, and a Tail Cone ofcourse.

Click to expand...

Don't look at the price but these are very nice. I bought an Honest John fin can and spin motors and made a very cool detailed Honest John.

https://www.shapeways.com/model/132...0-fin-unit-for-24mm-motors.html?materialId=62

Brent said:

Don't look at the price but these are very nice. I bought an Honest John fin can and spin motors and made a very cool detailed Honest John.

https://www.shapeways.com/model/132...0-fin-unit-for-24mm-motors.html?materialId=62

Click to expand...

Oh my! That is AWESOME!!! I want one but I'm screwed for a Rocketry Budget this month so it will have to wait.
Thanks for sharing though, as I'll use that for my next BT-60 Patriot Build.
I'll do something different for Retention however.

I tried contacting them to see if that can be cut for 38mm tubing since the OD is the same. I haven't gotten a response yet.

Edit: See below for new model.

https://www.shapeways.com/model/292...9mm-motors.html?li=user-profile&materialId=62

For the 1/10th models with heavier construction.

VARifleman said:

https://www.shapeways.com/model/292...9mm-motors.html?li=user-profile&materialId=62

For the 1/10th models with heavier construction.

Click to expand...

Wow some great stuff on that site!