"Green Monkey Aerospace"

It must be a Colorado thing Neil, my wife and I have got it too. Push those fluids and get better! Being sick makes me appreciate being normal.

Edward

nrk2of3 said:

All,

sorry about the video I had to pull it. I have a $10.00 go daddy site and all the downloads of the video have put me over my limit. I'm going to repost it somewhere soon. I just came down with the flu so I feel like hammered crap.
I will get back on task soon. I'm planning on pushing the 18mm stuff hard. But first i need to get better.

Will as far as testing on rockets that don't need recovery I think thats smart. I have flown lots of the art applewhite printer saucers. there free and build quickly. You can try a 3fnc type rocket just keep it light. if you mess up the delay no big loss. pointy nc for maximum lawn dart effect.

-Neil

Click to expand...

For posting videos you might try a put file page. Here's my put file page
with some 24 and 29 mm tests. https://www.putfile.com/willcarney

William

Any updates? I just started to play with Rcandy and fancy a set of these

Drazic said:

Any updates? I just started to play with Rcandy and fancy a set of these

Click to expand...

I posted a test of each motor size on my putfile page. A 13mm B, C and D
motor. All three tests burned fine. I had a small 18 mm case failure due to
me using the wrong o-ring and not having enough compression on it. I will
probably not use the Aerotech style nozzle again although it's fine if used
right. It's hard to get good compression using snap rings ends. The
Aerotech screw ends are better for this type of nozzle & o-ring combo. It
will work fine, you just have to do it right. I just prefer the graphite nozzles.

I have one motor for each of the 18mm cases right now but have not had
time to test them. All I have to do is grease the o-rings and put it them
on the stand. Hopefully in a week or so I will have them posted on my
page. All are Brilliant Blue like the 13mm tests.

My putfile page has not allowed me to post new pictures. I am not sure
what the problem is so I hope it also won't prevent the 18mm videos from
loading.

I would like to say the service and quality from GMA is excellant. The
products he has are top notch and well worth it.

William