Lets see your casings

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

exprditer789

Well-Known Member
Joined
Feb 11, 2010
Messages
290
Reaction score
0
O.K guys and girls.Lets see who has the most casings .Take a picture and tell us what brand and mm it is and post it.:p
 
(No pics, but here's a list)

Aerotech:
18/20 (x3)
24/40
29/40-120
29 full set (60, 100, 120, 180, 240, 360)
38 full set (120, 240 [x2], 360, 480, 600, 720, 1080)
54 full set (852, 1280, 1706, 2560)

CTI:
38 2g
38 4g
38 6g
38 spacer
54 4g
54 6g
98 4g + 2 98 spacers

AMW:
38/390 (IIRC)
38/640
54/1750

Loki:
38/240
38/480
38/740
 
Last edited:
Not yet...

I bought two for my Deuce, and then I thought I lost one. Just after I replaced it, I found it again, so now I have 3.
 
AT:
18/20
24/40
24/60
29/40-120
29mm closures plus 180 and 240 cases

CTI:

Pro38-1G
 
AT:
29/40-120
29/180
29/240
38/360
38/480
38/600
38/720
38/1080
54/852
54/1280

CTI
29 3G w/ 2 spacers
29 6G
38 2G x2
38 3G
38 5G
 
AT
24/40 x 2
29/40-120
29/60
29/100
29/180 x 2
29/240 x 2
29/360
38/120
38/240
38/360
38/720
54/852
54/1706

Gorilla
54/1050

AMW
54/1050
54/1750
54/2550
76/6000

Purple Woody
A couple 38s, don't remember size

West Coast Hybrids
38 of some size

Sky Ripper
29/75
29/125
29/185
38/220
38/400
38/580

-Kevin
 
Come on Ben...get that list up, before you sell off all your smaller cases....

I sold a few but last time I check it was:

snap ring:
8x38/240
2x38/480
1x38/660
54/1050
54/1400
3x54/2000
54/2400 (used to be 2550 ;) )
2x54/2500
76/1000 (1 grain)
76/2400
2x76/3600
76/6000
76/8000
98/7500
2x98/10000
98/13000
2x152/3000

pro38 1g
3xpro54/2g

I think thats it. I have since sold some of them off.

Ben
 
No pictures.

AT
18/20
24/40
29/40-120
29/180
29/240

CTI
Pro29 3-gr
Pro38 1-gr
Pro38 2-gr
Pro38 4-gr
Pro38 5-gr
Pro38 6-gr
Pro54 3-gr
on order: Pro75 6-gr

Loki
38-120
38-240
38-480
38-740
38-1200
54-2000
 
Last edited:
Well, as a matter of fact, Ben has some pieces of aluminum that are "ex-cases" ...as in, they USED to be motor cases (as in an "ex" girlfriend USED to be a girlfriend)......

ok ...I kid I kid....
 
AT

18mm - 3
24mm -3
29mm Hobby - 4
28 120 - 2
29-180 - 4
29=240 - 1
29-360 - 1

38-120 - 2
38-240 - 1
38-360 - 2
38-480 -1
38-600 - 1
38-720 - 1
38-1080 - 1

54-427 - 1
54-852 - 2
54-1280 - 1
54-1760 - 1

75-5120 - 1

Loki

38-120 - 1
38-240 - 1
38-480 - 1
38-740 - 1

54-1200 - 1

AMW

38-390 - 1
38-600 - 1

54-1050 - 2
54-1750 - 1

CTI

Pro 29 1G
Pro 29 2G
Pro 29 3G

Pro38 1G
Pro38 3G
Pro38 Spacer x 2

SKYRIPPER

29/75 - 2
29/125 - 3
29/185 - 1

54-550 - 1
 
Last edited:
Pic of just some of the bigger ones

(4) 4.5" x 22,000ns
(1) 6" x 16,000ns
(1) 6" x 24,000ns
(1) 6" x 32,000ns
(1) 6" x 40,000ns

Cases2.jpg
 
AT-
18/20-3
24/40-3
24/60-3
29/40-120-3
rms-
29/60-3
29/100-3
29/120-2
29/180-3
29/240-3
29/360-3
38/120
38/240
38/360-3
38/480-3
38/600-3
38/720-3
38/1080-3
54/426 to 54/2560
75/2560
98/10240
Loki-
38mm full set 120-1200
AMW-
75/3500
75/7600-2
Gorilla Rocket Motors-
38/390
38/640
54 full set 1050-2550
75/3500
75/7500
CTI-
29 3gr
38 5gr
98 6XL
Green Monkey Aerospace
18mm set
 
Last edited:
AT 24/40
29/40-120

CTI 38mm 1g
38mm 3g

Loki 38mm Full set

waiting for the day CTI Pro 150
 
Somehow, I knew this thread would come back.

My updated list:

AT Hobbyline
24 - 2
29 - 2

AT High Power
29/60 - 1
29/100 - 1
29/180 - 1
29/240 - 1
29/360 - 1
38/240 - 1
38/360 - 1
38/480 - 1
38/600 - 1
38/720 - 1
38/1080 - 1
54/852 - 1
54/1280 - 1
54/1706 - 1
54/2560 - 1

CTI
Pro29
4G - 1

Pro38
1G - 1
2G - 1
3G - 2
4G - 1
5G - 1
6G - 1

-Ken
 
40 (at last count)...

Solids:
24/40: Aerotech – 2
29/40-120: Aerotech – 3
29/180: Dr Rocket – 1, AT – 2
29/240: Dr Rocket – 1, AT – 1
29/360: Rouse-Tech – 1
38/120: Rouse-Tech – 1
38/240: Dr Rocket – 1, AT – 1
38/360: Dr Rocket – 1, AT – 1
38/390: AMW – 2
38/480: Dr Rocket – 1, AT – 1
38/600: Rouse-Tech – 1, AT – 1
38/720: AT – 1
54/427: Rouse-tech – 1
54/852: AT – 2
54/1280: AT – 2
54/1706: AT – 1
76/3600: Loki – 1
76/6000: Loki – 1

Hybrids:
29/75: Skyripper – 1
29/125: Skyripper – 1
29/185: Skyripper – 2
38-16”: Contrail – 1
38-20”: Contrail – 1
38-28”: Contrail – 1
38-36”: Contrail – 1
38-48”: Contrail – 1
 
Last edited:
You figure it out...........I quit count'n long time ago.


The good....98's 75's 54's 38's

The bad.......these ain't fly'n anymore!


The ugly....All the other well used 29's thru 54's just piled in boxes till I need them.

If I ain't got it, I sure know where I can borrow it. If I can't find it. Don't need to be fly'n it!!

100_4775.jpg

100_4766.jpg

100_4771.jpg

100_4774.jpg
 
Let's see if I can remember them all....


AT ( Black & gold old ISP)
1x 29mm x 180
1x 29mm x 240
1x 38mm x 240
1x 38mm x 360


Dr Rocket:
1x 29mm x 180
3X 29mm x 240
3x 29mm x 360
1x 38mm x 240
3x 38mm x 360
3x 38mm x 480
2x 38mm x 600
2x 38mm x 720
1x 38mm x 1080
1x 54mm x 1280
1x 54mm x 2560

Roush Tech
2x 38mm x 120
1x 38mm x 360
1x 38mm x 480
1x 54mm x 852


AMW:
1x 38mm x 390
1x 38mm x 640
2x 54mm x 1050
2x 54mm x 1750
1x 54mm x 2550
1x 75mm x 1700
2x 75mm x 2500
1x 75mm x 3500
1x 75mm x 7600
1x 98mm x 11,000
1x 98mm x 17,500

Kosdon East ( Gold hardware)
2x 29mm x 310
1x 75mm x 4700
1x 75mm x 6000

Kosdon: ( also Gold)
1x 38mm x 640
1x 38mm x 800
1x 38mm x 900
1x 38mm x 1116
1x 54mm x 330
1x 54mm x 1400
2x 54mm x 2000
1x 54mm x 3300
1x 75mm x 1100

APS:
38mm x 640
54mm x 2250

Purple Woody:
38mm x 3 grain
38mm x 4 grain
38mm x 5 grain
38mm x 6 grain


Misc
1x 54mm x 1050
1x 54mm x 1400
1x 54mm x 2900


Fisher ( EX )

1x 38mm x 6 grain
1x 38mm x 8 grain
1x 38mm x 10 grain


Loki:
38mm x 120
38mm x 240
2x 38mm x 480
3x 38mm x 740
1x 98mm x 5000


CTI:
1x 29mm x 6G
1x 38mm x 1G
1x 38mm x 2G
2x 38mm x 4G
2x 38mm x 5G
2x 38mm x 6G
2x 38mm x 6XL
1x 54mm x 6XL


I think that about covers it...

JD
 
Last edited:
1- 24/40 (Aerotech)
2- 29/40-120 (Aerotech)
1- 29/100 (rouse-tech)
1- 29/120 (Dr.Rocket)
1- 29/180 (Dr.Rocket)
1- 29/240 (Dr.Rocket)

1- 38/120 (Aerotech)
1- 38/240 (Dr.Rocket)
1- 38/360 (Dr.Rocket)
1- 38/480 (Dr.Rocket)
1- 38/600 (Dr.Rocket)
1- 38/720 (Dr.Rocket)
1- 38/1080 (Dr.Rocket)

1- 54/852 (Rouse-Tech)
1- 54/1280 (Rouse-Tech)
2- 54/1706 (1 Rouse-Tech & 1 Dr.Rocket)
1- 54/2560 (Rouse-Tech)
1- 54/2800 (Aerotech) :cool:

Pro 38
All cases except 6GXL and I have 2 1 grain cases.

Pro54
1 Grain
5 Grain

Also the 38/1080 case I have is engraved with serial number 00 and has a manufacture date of 04/98... does this mean it was the first one made?

motor casings.jpg
 
Let's see if I can remember them all....


AT ( Black & gold old ISP)
1x 29mm x 180
1x 29mm x 240
1x 38mm x 240
1x 38mm x 360


Dr Rocket:
1x 29mm x 180
3X 29mm x 240
3x 29mm x 360
1x 38mm x 240
3x 38mm x 360
3x 38mm x 480
2x 38mm x 600
2x 38mm x 720
1x 38mm x 1080
1x 54mm x 1280
1x 54mm x 1706
1x 54mm x 2560

Roush Tech
2x 38mm x 120
1x 38mm x 360
1x 38mm x 480
1x 54mm x 852


AMW:
2x 54mm x 1050
2x 54mm x 1750
1x 54mm x 2550
1x 75mm x 1700
1x 75mm x 2500
1x 75mm x 3500
1x 75mm x 7600


Kosdon East ( Gold hardware)
2x 29mm x 310
1x 75mm x 4700
1x 75mm x 6000

Kosdon: ( also Gold)
1x 38mm x 640
1x 38mm x 800
1x 38mm x 900
1x 54mm x 2250
1x 54mm x 3300

APS:
38mm x 640
54mm x 2250

Purple Woody:
38mm x 3 grain
38mm x 4 grain
38mm x 5 grain
38mm x 6 grain


Misc
1x 54mm x 1050
1x 54mm x 1400
1x 54mm x 2900


Loki:
38mm x 120
38mm x 240
2x 38mm x 480
3x 38mm x 740
1x 54mm x 2000
1x 98mm x 5000


CTI:
1x 29mm x 6G
1x 38mm x 1G
1x 38mm x 2G
2x 38mm x 4G
2x 38mm x 5G
2x 38mm x 6G
2x 38mm x 6XL
1x 54mm x 6XL


I think that about covers it...

JD

I think you have the most....:D:D:D:D
 
My brothers and I have just stepped into high power this past year so we dont have a ton but the ones we do have are:

pro38
2g
4g
5g (in the mail as we speak)

and soon to be added to the list is an:

AT
38/1080 for my level 2 cert (summer of 2011)

build thread coming soon to a forum near you :D

Matt
 
hmm... not fair posting this right AFTER I had most of my casings spread over the floor, picking out old ones without external snapring grooves, so a local shop could remedy the problem ( and at good cost,too ).
from memory...

AT and compatibles

18/20
24/40
29/40-120 - 3 ea, one rouse
29/180 - 2
29/240 - 3
38/120 - Monster motors
38/240
38/360 - 2 - one clone
38/480 - 2
38/600 - 3 complete ( King Viper III motors )
38/720
54/852 complete
54/1280
54/1706 - two complete
98/2550

APS

38 / 640
54 / 2250

Pro 38

5 grain

Propulsion Industries

29/40 E30 case

Synerjet

38/480 case - 2, one with damaged end

Kosdon

1" / 35ns - 6 pcs
1" / 105ns - 2 complete
1" / 250ns
29 / 150 - 2
29 / 250 - 4
38 / 390
54 / 700
54 / 1050
54 / 1400 - 2 (one cut down Loki cato case )
76 - 2500
76 - 7600

AMW

76 - 1700
76 - 3500

Ellis Mtn

38 / 390
38 / 650 - 3 pcs
38 / 910
76 / 7000

Thunderflame

22/60 - 2
22/120
22/180
29/100
29/150
38/240 - 2
38/480 - 2
38/720 - 6
38/960

Loki

38/240 - 2
38/440 ( 11" ex case )
38/480 - 3
38/740

Green Monkey

18mm set of 3 E,F,G I believe.

Advanced Rocket Motors

4" x 27000 ( O 2600 case )

Jeff Jacobs

P1500 hybrid motor

Green Dragon

13/5
18/30
22/40 - 4
22/80
22/120
29/80
29/160 - 2
29/240 - 2
38/240
38/360
38/480
38/600
38/840
54/2800
76/2500


~ AL
 
Back
Top