Greetings from Europe!
Please excuse my bad English - it's a foreign language to me
My model rocket experience so far: a few starts with c motors
I want to start building and fly mpr rockets now. The two rockets kits I want to start my mpr experience with are:
* bullpup from qmodeling
https://www.qmodeling.com/QModeling/Prod-Rocket-Bullpup.htm
Comes with a 24mm motor mount
* cheetah from aerotech
https://www.aerotech-rocketry.com/
Comes with 29mm motor mount with included 24mm adapter
In case if you want to reply on my questions, keep in mind, that:
I want to use a similar or maybe the same motor type with both rockets so I can exchange them.
I want to use a wide variety of motors.
I want to use a relatively cheap solution.
I use a 1.5m (or maybe 2m) long rail to launch my rockets from ( https://www.raketenmodellbau.org/forum?action=viewthread&threadid=4996&page=4 )
Here are my questions:
1) Would you recommend rms or single use motors for these rockets?
2) Should I consider using 29mm motors with these rockets, although the bullpup recommends 24mm?
3) Which motor types do you recommend for save and easy first launches with the bullpup?
4) Which motor types do you recommend for save and easy first launches with the cheetah?
Whoever takes the time to read and answer my post: thanks in advice!!!
Please excuse my bad English - it's a foreign language to me
My model rocket experience so far: a few starts with c motors
I want to start building and fly mpr rockets now. The two rockets kits I want to start my mpr experience with are:
* bullpup from qmodeling
https://www.qmodeling.com/QModeling/Prod-Rocket-Bullpup.htm
Comes with a 24mm motor mount
* cheetah from aerotech
https://www.aerotech-rocketry.com/
Comes with 29mm motor mount with included 24mm adapter
In case if you want to reply on my questions, keep in mind, that:
I want to use a similar or maybe the same motor type with both rockets so I can exchange them.
I want to use a wide variety of motors.
I want to use a relatively cheap solution.
I use a 1.5m (or maybe 2m) long rail to launch my rockets from ( https://www.raketenmodellbau.org/forum?action=viewthread&threadid=4996&page=4 )
Here are my questions:
1) Would you recommend rms or single use motors for these rockets?
2) Should I consider using 29mm motors with these rockets, although the bullpup recommends 24mm?
3) Which motor types do you recommend for save and easy first launches with the bullpup?
4) Which motor types do you recommend for save and easy first launches with the cheetah?
Whoever takes the time to read and answer my post: thanks in advice!!!