Search:

Try Discount Rocketry:

https://www.discountrocketry.com/modelrocketsus-nc55-nose-cone-p-2496.html?osCsid=td0khl8l400up1kdv2ipuvt390

BSD Thor. Love the whistle from the split fins.

Delete anything stuck in the outbox. For outgoing use port 587 with no SSL or 465 with SSL, put a check mark in my server requires authentication. For incoming use port 995 with SSL or 110 with no...

None that I have found. If Jack is around you can get them from him at the Desert Heat , Spring Blast or GHS launches. For in between times Hobbylink for midpower and Balsa Machining for High power...

Not true anymore unfortunately. F52 F40 F22 reloads and some single use engines all require hazmat shipping due the the size of the grains. Anything listed in the reloadable medium section requires...

Aerotech Warthog

The biggest problem is the possibily of the the T-nuts pulling out with the ejection force. This what I would do in this situation. I would coat the thread of the screws that go into the T-nut with...

Put a check mark in the box says this is a motor mount and choose the size from the drop down.

On my current build i am using a thin application of titebond molding glue to seal the gap between the fin and body tube. This should prevent any epoxy from leaking thru before it can cure...

Depends on the epoxy. 5 min can not be used. You can get an hour or more with 30 min. I have gone a couple of days with aeropoxy and up to a week with us composites. It will get thicker as it...

Aeropoxy is great to work with as is it so thick it stays in position for fillets. Mask on both sides apply and smooth with nitrile gloved finger and remove the tape to give a nice straight line. ...

I wonder if they will still do aerotech preorders during May and June?

The biggest problem I see with this design is that the recovery system is likely to get tangled up in the long fins.

Having to sort thru 4 grocery carts to find one that does not go thump thump thump due to bad wheels.

This camera looks like it might have some possibilities for on board video. Monoprice is a great site for cables and other gadgets.
...

Went to work and recovered from Spring Blast. I am more sensitive to heat then when I was younger. I flew my largest and most complicated build to date, a 7.5 inch Pershing 1A. It had a...

Great shots Joyce! Another great launch as well. Many thanks to all those involved in setting it up and running it, it is appreciated. A very good night launch (which is my favorite event). Great...

Where did you buy them? I just got F24W reloads from Hobbylink and they came with copperheads. I purchased first fire juniors as I am going to cluster them, but having them included would be a plus.

Getting into pre-launch trip mode. Will be driving up Saturday morning (really looking forward to it). Finishing up the Pershing (never thought I would use up two cans of primer on one rocket).
...

First pass at painting is done. Will postpone detail painting till after the launch this weekend at Spring Blast. Onward to fitting the recovery system.


127013

wood filler, sand, wood filler, sand ............

126464

I had originally planned on attending this years NSL, but as most of my night launch rockets are high power I decided against making the 14 hr drive and having to sit out the night launch (my...

As the rockets for the night launch are limited to a G80 and 2.2 lbs an 8k night waiver seems rather pointless.

Made Shrouds. There are times when you just need three hands. Dry fit of first one.

125921

I think the FSI F100 was 27 mm and was actually just under an F in reality (if it did not CATO).

Do you have a RockSim file for it? I would be interested in how to sim it. I know if I was doing RSO and duty and someone brought me this one I would have doubts about it's stability (which is...

I usually love Pixar films, but I hated Cars, so if it is done in a similar style I will pass on it.

I had to make the same choice when my dremel died. I got a Black and Decker RTX from Amazon. Cheaper then the cost of repair and more powerful also. I am happy with it so far. I do not know why...

If you are interested, I have a 3.9 inch outside diameter crayon bank that I am not going to use. I have some plywood fins that I miss cut for another project and I can sand down some centering...

I launched the Rickter Recker at Desert Heat's night launch at the end of March. It was a great flight, a slow majestic launch to about 900 ft. The appearance of the burn was different then the H...