Search:

Very nice! Great take on the Mud Wasp. :clap: :clap:

The Alien Troop Mover was manufactured by Thrustline Aerospace, nice rocket! It came with 6 of the little alien paratroopers. The EMRR review can be seen here.

Well done! :clap::clap:

Dusting a plastic chute with baby powder will help make it open more easily.

Sounds like a good day All in all. If I may make a suggestion fly the Astra with a streamer instead of a chute. I fly mine this way all the time.

Here is the thread on TRF1 regarding the 4 by 24mm Fat Boy. I used 4.4 oz of nose weight. I also cut off the base of the nose cone and pack the chute there. The 24mm and 4 by 18 mm has 4 oz of nose...

It is tumble recovery were we launch the grass is fairly soft, the booster is 24mm.

dlazarus6660
Which launch did you lose it?
Which launch did you lose it? Was this the Yellow Fat Daddy? Got...

Quest SuperBird comes to mind, I have also used them in my ASP 24mm V2 with an adaptor.

That will work! Good luck with the build we will need to see pics!

I have built a few Fat Boys, a two stage, a 4 by 18mm cluster, a single 24mm and a 4 by 24mm cluster as well as the one referenced above.

See here and here.

The Estes C6 and D12 have a similar burn time see D12 and C6 data sheets from the NAR web site. I think I used a D12-5 and 4 C6-5s.

Wow the Mini Magg makes the Onyx look tiny!:y::D I have an Onyx great flyer. If I decide to go for my L1 the Magg will probably be te rocket.

Very cool! I did the same thing, see this thread it has flown on a D12 and 4 C6s all but one motor lit and it still screamed off the pad.

I had the same thing happen with my green crayon, should have purchased the RED one. I did manage to find the fin unit, gotta figure out what to build around it.

I have the Badger 155 Anthem dual action air brush and have had good luck with it. I believe most folks here will recommend the Paache single action. I do wish I had known about using a CO2...

I guess this should go here. It is a Baby Bertha with a Deuce motor mount and nose cone. The launch pic is courtesy of Fliskits (thanks Jim).
...

I am probably the only person on the planet that does NOT like Candy Corn. :puke::puke:

I found these pencil grips on line that may help with your X-acto knife. The site is arthritissupplies.com.

My wife has had arthritic knees for years and is planning on knee replacements at...

Very interesting, that is the first time I have ever heard That enamel can be used over acrylics. I will have give this a try. Thanks

I do the same. Have not had a problem with the paper lifting either, I also use CA on the edges of the fins ( not the root edge).

Very nice work! They look great! Mini Brutes are cool!

Fliskits Deuce's Wild and Estes Fat Boy

I have no name for this rocket, 1.637" diameter 24mm motor mount rips on a D12.

http://i486.photobucket.com/albums/rr226/khamel2008/Rockets/Nameless3.jpg
...

Here is a keychain cam video of the Grappler.

http://www.youtube.com/watch?v=7-OAlFubiBg

Here is mine. Nice flyer, built a MMX downscale also.

http://i486.photobucket.com/albums/rr226/khamel2008/Rockets/c981eb60.jpg
...

Fun build unfortunately lost it's maiden launch on an F24!

http://i486.photobucket.com/albums/rr226/khamel2008/Rockets/SkyTorpedo14.jpg
...

Full size Triskellion

http://i486.photobucket.com/albums/rr226/khamel2008/Rockets/9d2332a7.jpg

Teeny Triskellion
...

Yes I still have the decals somewhere.



http://www.rocketreviews.com/images/archive/images_est/est_big_dawg_be03.jpg

Bt55 OD 1.325". I believe it is OOP at this point, but should be easy enough to clone.

Funny we bought two as well, got them online for real cheap. I found a couple of pics of it, it is stock.

http://i486.photobucket.com/albums/rr226/khamel2008/Rockets/03f45709.jpg
...