Llama Logo Reproductions

[Pem Tech]

Troj,

You misspelled Illlamanati......expect punishment as soon as you stop expecting it.....

G.D.

We knew what he meant...
But that doesn't mean we can't snicker anyway.
*snicker*

 

[qquake2k]

If I were a gamester I would have wagered my last quatloo that it was Triskelion symbology but then what does a lowly thrall know anyways?

I was thinking Triskelion, too. We are such geeks!

 

[bradycros]

Pre colored marker fin.

 

[bradycros]

Post colored marker fin. Splotch free.

 

[bradycros]

The first part of the sentence high lighted in orange is a bit wonky! Page 21, step31.

Please unwonkifiy the hidden meaning.

 

[Pem Tech]

The first part of the sentence high lighted in orange is a bit wonky! Page 21, step31.

Please unwonkifiy the hidden meaning.

This is why we Beta build....
The central hole in CR#3 needs to be enlarged to allow easy passage of the motor tube.

 

[bradycros]

This is why we Beta build....
The central hole in CR#3 needs to be enlarged to allow easy passage of the motor tube.

Yes, of course.

I understood the intent of the sentence I high lighted in orange and then continued building. Maybe the point I wanted to get across should be; 'Shouldn't the word "you" be substituted for the word "the" as the fourth word in this sentence'?

"the" is the wonkafiyed part of the sentence. Please review the sentence.

 

[Pem Tech]

Yes, of course.

I understood the intent of the sentence I high lighted in orange and then continued building. Maybe the point I wanted to get across should be; 'Shouldn't the word "you" be substituted for the word "the" as the fourth word in this sentence'?

"the" is the wonkafiyed part of the sentence. Please review the sentence.

Any other corrections while I'm typing?

 

[bradycros]

Any other corrections while I'm typing?

Nope.

 

[Pem Tech]

Nope.

Alrighty then, can't wait to see the finished build!

 

[bradycros]

The next several steps involve glueing the segments and centering rings together. Although these steps are repetitive, attention to matching up the exterior details still requires a keen eye.

Segments 1 & 2 are already glued together with the ballast, so segment 3 is added to them.

Then the centering ring that fits into segment 3 is glued into place. Construction of the nose cone is complete.

Only enough glue to get the job done is used. If the white glue is slatherd on, wrinkles will be seen on the exterior.

A wrinkled exterior will not only look really bad, you will be required to do the walk of shame.

 

[SteveA]

Will you be using card stock rings for formers?

Disregard last... I was looking at an earlier thread.

 

[bradycros]

Here's the bottom two segments of the lower body, 6 &7 with #7 centering ring.

These pieces meshed together well. All the parts of this kit are layed out great and mesh very well.

After the glue set, the #6 centering ring was glued into segment 6.

 

[troj]

I bet if I built 10 of these, I might get one that looks 1/3 as good as this one does!

-Kevin

 

[bradycros]

I bet if I built 10 of these, I might get one that looks 1/3 as good as this one does!

-Kevin

Your too modest, I'm sure you can do alot better then your letting on.

 

[bradycros]

Then ya grab the #5 segment and its centering ring and repeat the process.

 

[bradycros]

The last segment, #4 and it's centering ring are joined up with the rest of the lower body.

 

[bradycros]

This is what I've got so far.

 

[dixontj93060]

That is looking very nice.

 

[gdjsky01]

Superb so far... knowing you, thats what I would expect!

 

[cwbullet]

I impressed with your mad skills. Mine came together an flew well but was not near as beautiful.

I definitely can't wait to get another one to build.

 

[qquake2k]

It's hard to believe the body is card stock. It looks great!

 

[pepe]

my next rocketry purchase was to be a saucer but after seeing this thread I think I'll try a cardstock rocket instead. Any advice or suggestions on a first kit

 

[bradycros]

1st, thanks to all that took the time to post their positive thoughts on the Logo Rocket.


2nd, suggestions on a free first kit would be this link:

www.rocketry.wordpress.com/ultimate-paper-rocket-guide

When the page comes up, scroll down to the title; "EricTruax".
Click on 'M.A.G.P.I.E. version 1.37' for the templates, then click on 'Insructions and Updated Story'.

This is a good starter build.

 

[Pem Tech]

my next rocketry purchase was to be a saucer but after seeing this thread I think I'll try a cardstock rocket instead. Any advice or suggestions on a first kit

There are few simple models on this page: https://jleslie48.com/gallery_models_apollo.html

 

[Pem Tech]

And here as well...
https://currell.net/models/mod_free.htm

 

[bradycros]

The motor tube was shoved up the rear end for a test fit. It slid in with no problem. :grin:

Segment #8 (nozzle) was a good fit also.

 

[Pem Tech]

The motor tube was shoved up the rear end for a test fit. It slid in with no problem. :grin:

Segment #8 (nozzle) was a good fit also.

*HAppy Dance*

 

[gdjsky01]

Click on 'M.A.G.P.I.E. version 1.37' for the templates, then click on 'Insructions and Updated Story'.

This is a good starter build.

Not to steal anything from the thread, but I agree. Here's mine.

Now back to the build!

 

[JPVegh]

Perty nifty build, really spiffy.