EX test bed rocket

The Rocketry Forum

Help Support The Rocketry Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

matt_taylor

Well-Known Member
Joined
Jul 2, 2002
Messages
376
Reaction score
1
i while ago i planed to build a 3" rocket that was dual deploy, i got Dpatell to make a rocksim file too, but i never got around to building it , but that was 6 months ago and now ive started it,
i have attached the rock sim file, but i am now going to use a 38mm motor mount instead of a 54mm, so if someone could change this for me that would be great!!

matt
 
i found some mailing tubes that fit PML 3" componets , i will turn a custom nosecone on my lathe and make the CR's and bulkheads myself , im hoping to keep with a cheap porject,
here is a pic with one of the body tubes fiberglass with 8 oz glass

matt
 
Nice Feet.... Here is that rocksim file you requested. I assumed you were going to use PML tubing because the 54mm motor tube was phenolic...
 
yes i know i haven't posted any progress pics , but i flew it today on a H123W with a RRC2 in for deployment it flew to 1416 feet
i should have some pics soon. so now i have done my first dual deployment rocket flight!! :D
 
Back
Top