View Full Version : 29mm HP RMS question
25th May 2009, 06:41 PM
Can anyone tell me if the forward and aft closures for the Aerotech 29mm high power RMS casings are interchangable? Specifically, could I use the closures from a Dr. Rocket 29/240 on an Aerotech 29/360 casing?
25th May 2009, 06:50 PM
Yes they are. The same closures work on the 29/60,100,120,180,240,360. There is a seal disk that is required in the 360 loads and some 240 loads, I think. That said Dr. Rocket, Rouse Tech, and Aerotech brands of hardware are also interchangable as they are all essentially the same parts.
25th May 2009, 09:00 PM
Just make sure you have the new style aft closure. The Older style closure will not work with any 29/360 load since it uses a wider Nozzle.
26th May 2009, 01:24 AM
Hmm... I forgot about that. I got two aft closures (one for use on the 180/240 and another for the 360) when I purchased my Dr. Rocket 29mm kit years ago because of the size differences... of course the larger openning works with all the cases.
26th May 2009, 03:13 AM
OK, thanks guys, I appreciate the help.
Powered by vBulletin® Version 4.1.12 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.