Lets Show off Our Best Looking micros!

[ScrapDaddy]

Ok Micromeister, You Asked For It! Lets Post Pictures of Your Best looking Micros!, And Please Don't Show The Little plastic Bricks that Quest Gives you
(i have to admit they are Good looking plastic bricks:D)

[ScrapDaddy]

Very KEWL Bill!
I love that Little joe-I, it's gotta be one of the best looking micro Scale models i've seen. And that is a WHOLE other thread subject. Micro Scale

Wait did you mean Micro Scale? Woops English is funny that way but anyway this thread is here so might as well use it :D

[sandman]

My favorite is my mini Astron Spaceplane. Best flight was almost a minute glide but boy does it not like any wind during glide.

I haven't flown the Herc yet...but I will!

I tried to fly the herc but...I forgot the launch lug.:o

[ScrapDaddy]

Wow those ate really nice looking :)

[rokitflite]

Ok Micromeister, You Asked For It! Lets Post Pictures of Your Best looking Micros!, And Please Don't Show The Little plastic Bricks that Quest Gives you
(i have to admit they are Good looking plastic bricks:D)

Scrap, shouldn't this thread start with you showing off some of your models?:confused:

[sandman]

Wow those ate really nice looking :)

The decals for the Interceptor were made by JimZ as a challange to me. They took about 4 hours to put on!

[ScrapDaddy]

Try making a miniture apogee SaturnV with all the coragated wraps, centering rings, coustom tubing..... Balh blah blah :)

[Micromeister]

Scrapdaddy:
I an no more pick a single mico as my favorite then I could one of my kids over the other. They are all special to me as are my models.
When Micro's came into being it became a labor of love if you will to recreate all the REALLY KEWL and outstanding models from the golden age of rocktry in this slightly smaller scale.

While I can't pick just one of the 170+ individual Micro models in my current fleet here are two of the most requrested and most flown. 1st is the model I chose for my avatar and best flying Micro models in the fleet; the 3X Minimum Diameter T2+ downscale Interceptor with it's display stand booster. This one model more than almost any of my other micros has had more flying time with 42 logged flights. During that time it's been hung in a tree and had 3 shockline replacements. She's starting to look a little worn aroung the edges but it's still one of my favorites.

The other Most flown "favorite's" are my 2 T4 Downscle Der Red Max in winter and Summer camouflage paint schemes with a working launcher diorama constructed from the photo on the pack page of an original Der Red Max from back in the day. the launch and combined models have over a 14 flights.

Are you asking to see what I think are my Best looking Micro Models or are you talking about real Micro Scale models. There is a huge difference. Micro Scale models, that is micro models of real flying space vehicles and missiles is a completely different subject and should have it's own thread.

[Micromeister]

Try making a miniture apogee SaturnV with all the coragated wraps, centering rings, coustom tubing..... Balh blah blah :)

While I haven't done a micro Saturn vehicle yet I have done a downscale BT-5 Orion corrugated wraps, centering rings. custom tubing, turned parts balh, blah blah as you put it.

Like Rokitflite, I'd really like to see something you've put together also. talk is really very cheap...seeing what we're doing often helps.

[ScrapDaddy]

Ok I will just promise you won't laugh :) (I'm not really into sratch building micros just yet but it's on my to do list after (machbuster, superroc,cluster payloader, the Nell, a 4-stager (13mm and 3X18mm)clustered multi-stage and then finally micro maxx (I don't know why it's so far down there) Iv really only got one and it's the little Bic Stic one from art applewhite :o (the only one I built before I got tangled up in other projects......:D and I'll try to remember to start a build thread about them

[ScrapDaddy]

Scrapdaddy:
I an no more pick a single mico as my favorite then I could one of my kids over the other. They are all special to me as are my models.
When Micro's came into being it became a labor of love if you will to recreate all the REALLY KEWL and outstanding models from the golden age of rocktry in this slightly smaller scale.

While I can't pick just one of the 170+ individual Micro models in my current fleet here are two of the most requrested and most flown. 1st is the model I chose for my avatar and best flying Micro models in the fleet; the 3X Minimum Diameter T2+ downscale Interceptor with it's display stand booster. This one model more than almost any of my other micros has had more flying time with 42 logged flights. During that time it's been hung in a tree and had 3 shockline replacements. She's starting to look a little worn aroung the edges but it's still one of my favorites.

The other Most flown "favorite's" are my 2 T4 Downscle Der Red Max in winter and Summer camouflage paint schemes with a working launcher diorama constructed from the photo on the pack page of an original Der Red Max from back in the day. the launch and combined models have over a 14 flights.

Are you asking to see what I think are my Best looking Micro Models or are you talking about real Micro Scale models. There is a huge difference. Micro Scale models, that is micro models of real flying space vehicles and missiles is a completely different subject and should have it's own thread.

Micro models period I could be anything.....

[DM1975]

Although I am not really into the micro stuff, I have some major respect for you guys, especially, but not limited to Micromeister for the detail you put into these rockets. It amazes and intrigues me to no end. I wish I had that amount of artistic skill. :clap:

[ScrapDaddy]

Well my rockets look great untill I paint them ........:D

[Micromeister]

It really is hard to pick only a few but I'll try to limit to some of the newer ones.

[Micromeister]

How come were not seeing anyone posting model pics? Come on Maxers I know ya have them...let's see them.

[Rocketree]

I'm not one of those people who spends hours in the body shop making a fancy micromaxx,but I do have a cool looking honest john. http://www.rocketryforum.com/images/smilies/boat.gif

[Micromeister]

I'm not one of those people who spends hours in the body shop making a fancy micromaxx,but I do have a cool looking honest john. http://www.rocketryforum.com/images/smilies/boat.gif

LOL!!! love the "John boat"!
and your Avatar is kinda intersting as well...looks a little like my old Fender Strat. Not a micro either but nostalgic sigh! Sorry WAY of topic!

Back to Micros.

[Huge Blues]

LOL!!! love the "John boat"!
and your Avatar is kinda intersting as well...looks a little like my old Fender Strat. Not a micro either but nostalgic sigh! Sorry WAY of topic!

Back to Micros.

Not to further digress but I have to ask:

Looks like your plugged into a Silvertone head on it's matching cabinet.
Is that the all tube version?

[Micromeister]

Not to further digress but I have to ask:

Looks like your plugged into a Silvertone head on it's matching cabinet.
Is that the all tube version?

Yep sure it. In all the years that's the only amp I've owned, still works like a charm. It's the 6-10" speaker models.

sorry for the distraction. I better add another micro model or two. 2.5x downscale Laser-X and Courier

[dixontj93060]

Wow, really nice stuff! (Unfortunately, I have fat fingers and have to stick with things that are much larger.)

[Huge Blues]

Here's two of my cardstock MMX builds.
A Ghauri IRBM and a Convair MX-774.

[MarkII]

My micros are more cute than pretty. Also, I have built far fewer of them than Micromeister. I'll try to get some pictures taken and posted tomorrow.

MarkII

[Micromeister]

Wow, really nice stuff! (Unfortunately, I have fat fingers and have to stick with things that are much larger.)

Oh come on how Dixon!
6'-2", 300lbs+ with short stubby fat fingers just like you;) I'm sure if you try one you'll happily find they really aren't all that much different then building any other Rocket. Ya just need to keep track of those clear disappearing Launch lugs LOL!!! :roll: They really are a hoot to build and fly!

[Queeg500]

V2 and AIM-4 Falcon. These are in my - best looking and have flown - category. When I get organized enough to get/make some micro decals, the first rocket I would build would be the Interceptor. All inspiring kits, guys. Thanks for sharing.

[Micromeister]

They are a couple very Nice looking Micro Scale models, they should also be posted in the Micro Scale thread;)

Do you have a Scale factor for either or both? Very nicely done.

[Queeg500]

I did photocopier scaling - sizing original plans until the body tube matched the drawing. The V2 is actually two Estes Swift kits - BT-5 body tube and 2 nosecones - used the p. 7 fin template from the Estes K22 V2 plans out on Jim Zs site. About this time last year there was a thread about scale up/down calculations that I thought was interesting. So I noticed the label from an old Launch Pad Falcon kit and thought that looked like a scale drawing so I put it on the photo copier and sized it until the airframe matched the diameter of a BT-3. perfek

[ben_ullman]

still waiting for Scrap daddy to post a picture! Out of every thread he has started/posted I have not seen 1 picture

Ben

[ScrapDaddy]

Give me till Saturday so I cam borrow my dads iPhone

[slogfilet]

Queeg, the V2 is one of my absolute favorites... and that one looks good!

I need to spend a bit more time with micros, methinks. All I have right now is a semi-primered Quark! Ok, so it's mini, not micro. :blush:

[Micromeister]

Queeg, the V2 is one of my absolute favorites... and that one looks good!

I need to spend a bit more time with micros, methinks. All I have right now is a semi-primered Quark! Ok, so it's mini, not micro. :blush:

Slogfilet, it cetainly could be "Micro" with very little effort:) Just about any BT-5 model can be Micro Maxx converted. Just build them light.

Queeg: I scaled my V2-#2 on BT-5 as well. I've found the easiest way to pick a scale is to go with a standard body tube OD divided by the prototype vehicles OD to get a Multiplier. With it all the original vehicles dimension can be multiplied to get the scale dimensions (except degrees which stay the same). To obtain the Scale reverse the numbers dividing the full size vehicle by the body tube size to get your scale factor.
ie. BT-5 = .544 OD V-2 = 65" .544/65= multiplier .00836923...
65/.544= Scale factor 1: 119.4852... Hope this helps.

[Micromeister]

Come on guy's Give ScrapDaddy a break...
He'll post something when he takes some more pictures.
Ben; He did post a photo of one of his Bic Pen Micro models...don't recall which thread but its here somewhere. Not all of us document everything we do sigh!

[blackjack2564]

Ok here's a few of mine.

Hey Ben .....I thought you retired?

Flis kits:

Honest John
Hem-V
Deuces Wild
Dead ringer

[blackjack2564]

A few more:

Petite Preator.... Flis kits

Scratch built DarkStar and BlackHawk24

The last one WAS a Micro Ultimate Endeavor. Be care about feeding them or getting them wet after midnight.

OR THIS can happen!

[UPscaler]

A few more:

Petite Preator.... Flis kits

Scratch built DarkStar and BlackHawk24

The last one WAS a Micro Ultimate Endeavor. Be care about feeding them or getting them wet after midnight.

OR THIS can happen!

Wow, they're just like those magical growing animals!

Shouldn't that be a blackhawk 6?;)

[Micromeister]

Very nice stuff Jim!
I'm just about done with my Flis Dead Ringer, Stinger, 3's-A-Charm, 3- Big Honk'in rockets and micro Midget 2-Stage. need another decent weekend for painting and TIME. Trying to decide if I'm gonna try to design a Decal for the Big Honk'in Rockets or just Name them Thing-1, 2, & 3 LOL!!!